Shop

Key features: M12 Female threads on both ends Available lenghts: 10, 15, 20, 25, 30cm Aluminum made

R-2000MB/s/ W-2000MB/sIP67Warranty 5 Years

Holder features: 1/4" mounting screw 180-degree regulation Quick-release system NATO standard Rubber pads Aluminum made Rail features NATO standard 60mm lenght Safety pin Aluminum made

Holder features: 1/4" mounting screw 180-degree regulation Quick-release system NATO standard Rubber pads Aluminum made Rail features NATO standard 95mm long Safety pin 3/8" thread + Arri locating points Aluminum made

The Lyre is a patented suspension system that is known for its durability and strength. Unlike other suspensions that use elastic or rubber components, the Lyre is virtually unbreakable and resistant to wear and tear. It has replaced the traditional silicone O-rings suspension and is compatible...

Offers much improved isolation from camera noise Suitable for cameras with a 1/4'' female thread Virtually indestructible

Key features: 360-degree rotation M6 mounting screw 4 cold shoes 1/4" and 3/8" mounting points 15mm rod mount Solid structure Aluminum made

Supplied with a corresponding Rycote Windjammer Made of durable, high quality open-cell acoustic foam For mics 24-25mm in diameter. Slots less than 5cm from mic front

- 1/4" mounting points- Arri locating point (3/8" mounting point on top)- M4 threads (top front, bottom front)- Cold shoe mount- Strap holder- Aluminum made

Using both foam and windjammer together provides up to 20dB wind and pop Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam The Windjammer offers a further 12dB wind noise attenuation

- Mounting bracket + HDMI clamp- Three-piece clamp- Adjustable span- Aluminum made

Shotgun microphones with slots no further than 12cm from the front of mic

Key features: Ergonomic design Four-piece cage joined with screws Easy access to plugs, slots, and buttons 1/4" mounting points 2 poinst of cage-to-camera attachment (side and bottom) Arri locating points (+ 3/8" mounting point) top and bottom Strap holder Compatible with Sigma LVF-11 LCD...

Supplied with a corresponding Rycote Windjammer Made of durable, high quality open-cell acoustic foam For mics 24-25mm diameter, slots less than 18cm from mic front

- 1/4" mounting points- One mounting screw (bottom)- Cold shoe mount- Strap holder- 3/8" Arri locating points- Standardized spread of the mounting points- Better access to on/off switch

For Sony DCR-VX1000 and DCR-VX2000 Mics For Sony DCR-VX2100 Microphone Fits Mics up to 2" Diameter & 2.75" Long Designed for Use over a Foam Windshield

Key features: 1/4" mounting points Arri locating points (+ 3/8" mounting points) M4 mountin points (top-front) 4-piece cage Built-in safety NATO rails (sides) Aluminum made

Mini windjammer for Zoom H6 with MSH-6 caspule.

1/4" mounting points 3/8" Arri locating point M4 threads (upper-front) Anti-twist M2.5 screw (eyelet attachment) Cold shoe Strap holder

Up to 10dB wind/pop noise attenuation, min high-frequency loss Excellent resistance to moisture and UV light This windshield offers up to 20 dB wind noise attenuation Discreet slip-on windshield Made from durable, high quality open-cell acoustic foam

- 4 points of plate-to-camera attachment- 1/4" mounting points- 3/8" mounting points + Arri locating points- Mounting forwards or backwards- Aluminum made

- 2 points of plate-to-camera attachment- 1/4" mounting points- 3/8" mounting points + Arri locating points- Aluminum made

- Left and right side suitability- 2 points of plate-to-camera attachment- 1/4" mounting points- 3/8" mounting points + Arri locating points- Aluminum made

Up to 10dB wind and pop noise attenuation with minimal high-frequency loss from this discreet, slip-on windshield Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam

- NATO Standard- 95mm long- 2 safety pins- 1/4" threaded openings- 3/8" threaded opening + Arri locating points- Aluminum made

- reversible plate - left/right side compatible- 2 points of plate-to-camera attachment- 1/4" mounting points- 3/8" mounting points + Arri locating points- Aluminum made

Pack of 20 Fits A Wide Range Of Microphones Lightweight But Tough

- two-piece set- 1/4" mounting points- Arri locating points (+ 3/8" mounting point)- Aluminum made

Pack of 20 Fits A Wide Range Of Microphones Lightweight But Tough

- three-piece set- 1/4" mounting points- Arri locating points (+ 3/8" mounting point)- Aluminum made

Pack of 20 Fits A Wide Range Of Microphones Lightweight But Tough

- two-piece set- 4 points of plate-to-camera attachment- Mounting top plate forwards or backwards- 1/4" mounting points- 3/8" mounting points + Arri locating points- 95mm long rail- 2 safety pins

FEATURES Weatherproof cover for mono and stereo windshields Diffuses rain droplets sound Minimises rain noise when recording in wet weather conditions

- Direct attachment to the camera- 2 points of support-to-camera attachment- 2 points of support-to-adapter attachment- Aluminum made

FEATURES Weatherproof cover for mono and stereo windshields Diffuses rain droplets sound Minimises rain noise when recording in wet weather conditions

Suitable for Large Diaphragm recording microphone Offers upto twice the isolation from cable and stand-borne noise Virtually indestructible Suspension weight: 145 gOverall diameter: 120 mm (4.72″)Length: 170 mm (6.39 ') Depth: 70 mm (2.75″)Microphone diameters: 55-68 mmMicrophone length: up to...

Handle key features:- Quick-release system- Front/back, left/right adjustment- 1/4" and 3/8" mounting points- 2 cold shoe mounts- 15mm rod opening- NATO standard mounting- Aluminum madeRail key features:- NATO Standard- 95mm long- 2 safety pins- 1/4" threaded openings- 3/8" threaded opening +...

Compact design Ultra low noise circuitry Sophisticated RF shielding Low power consumption

- 2 piece set- 4 points of plate-to-camera attachment- Mounting top plate forwards or backwards- 1/4" mounting points- 3/8" mounting points + Arri locating points- 1 cold shoe handle mount- No-tools handle adjustment

Compact design Ultra low noise circuitry Sophisticated RF shielding Low power consumption

Top Plate key features:- 4 points of plate-to-camera attachment- 1/4" mounting points- 3/8" mounting points + Arri locating points- Mounting forwards or backwards- Aluminum madeHandle features:- 360-degree rotation- M6 mounting screw- 4 cold shoes- 1/4" and 3/8" mounting points- 15mm rod mount-...

Compact design Ultra low noise circuitry Sophisticated RF shielding Low power consumption

Side Plates key features:- 2 points of plate-to-camera attachment on each side- 1/4" mounting points- 3/8" mounting points + Arri locating points- Aluminum madeHandle key features:- 2 x Arri locating points- 1 x cold shoe mount- 1/4" mounting points- Attachment: 3/8" thread + Arri locating pins-...